int -allows commands to by typed in the keyboard rather than thru the BSD socket. The data cannot be inspected in this mode.
debug -more debugging printout about what is going on.
port= sets the port to the specified value int Hex (e.g. 0x1341). The default value is 0x1340. NOTE: do not specify port with leading 0x on sparcs.
where command reads the
telescope position from the telcod
interface.
done tel_status name=Nickel obs=Lick lat=37.3417 long=-121.6428
elev=1292.0 east=-82.5 west=82.5 north=67.5 south=-30.0 alt=24.5
scale=12.25
Where the telescope limits are taken from the Nickel Users manual and the location is taken from Steve Allen's listing
Last Revised January 5, 2001