NAME
ctr5read-photometer reading program
SYNOPSIS
ctr5read [help] [nsamples=10] [sleep=1] [cycles=]
[cycles=]
DESCRIPTION
ctr5read reads the counts in all seven channels
and prints out the count rate in Hertz once per
second until interrupted by a Cntrl^C or until the cycles
expires.
This command is similar to
readphot except that it
does not use the
rseti server but instead reads
the counters directly.
This means that it can be used at the same time as
the data taking and can only be run on the data
taking computer.
Note that the sample rate cannot be adjusted
by this command.
Last Revised May 17, 2001