Quasar Configuration
This 486 with 8 MB of memory is used to control the telescope
dishes and delay lines.
devices
The following must be created with the mknod command
and chmod 666.
/dev/pc58 26 0
/dev/dio24 28 0
startnet
quasar
rc.inet1
modprobe ne io=0x320 # to fire up ethernet
rc.local
insmod -v pc58 # OMS motor controller card
insmod -v dio24 dio24_base=0x310 dio24_configure=0x8a
Last updated on January 17, 2000