Oseti Configuration

This 133MHz Pentium donated by Crystal PC CS500 is used for the Seti photometer. It contains a ComputerBoards CTR10 10 channel counter card with the following (non-factory)jumper setting.

I/O address jumpered for 0x340
J2 IRQ#5 jumpered for P1 
J3 IRQ#4 jumpered for P2 
Wait State ON

A DDA06/Jr Digital to Analog converter card with all three DAC chips installed. Jumpered as follows:

I/O address factory default at 0x300
J1,J2,J3 on UPDATE

It has a 3 Com 3c905B PCI ethernet NIC.

devices

The following must be created with the mknod command and chmod 666. Also the /dev/cm206cd device was deleted.

/dev/ctr5a    31  0
/dev/ctr5b    28  0
/dev/dac06    32  0

startnet

rseti

rc.inet1

rc.local

insmod ctr5module -o ctr5a  ctr5_base=0x340 ctr5_name=ctr5a 
insmod ctr5module -o ctr5b ctr5_major=28 ctr5_base=0x344 ctr5_name=ctr5b ctr5_irq=4
insmod dac06module -o dac06

Last updated on December 11, 2000