IRcam Configuration
This 133 MHz Pentium is used to control the IR
Camera.
All PC boards necessary for operation are listed below - and all use
archaic ISA bus architecture:
- Keithley Instruments Arbritrary Waveform generator
- Computer Boards DAS1600 A/D Card
- Computer Boards MEGA FIFO digital buffer
IP address
IRcam lives on the internal Fast network as 172.16.0.30 .
devices
The following were created with the mknod command
and chmod 666.
/dev/awfg 26 0
/dev/fifo 27 0
/dev/das1600 28 0
startnet
runs the program rcam to control the IR camera.
rc.local modules
insmod awfgmodule
insmod fifomodule
insmod das1600module
/etc
#ntp.conf
server=fast
driftfile=/etc/ntp.drift
Last updated on June 6, 2005